Kāpēc dažiem tīkla spraudņiem ir pārklājumi, un daži ir nikni?

Satura rādītājs:

Kāpēc dažiem tīkla spraudņiem ir pārklājumi, un daži ir nikni?
Kāpēc dažiem tīkla spraudņiem ir pārklājumi, un daži ir nikni?

Video: Kāpēc dažiem tīkla spraudņiem ir pārklājumi, un daži ir nikni?

Video: Kāpēc dažiem tīkla spraudņiem ir pārklājumi, un daži ir nikni?
Video: 20 MOMENTS YOU WOULDN'T BELIEVE IF NOT FILMED - YouTube 2024, Aprīlis
Anonim
Pieskarieties pie biroja pietiekami ilgi un jūs redzēsiet atšķirīgu tendenci tīkla kabeļu tīklā. Dažiem kabeļiem ir pārklāts spraudnis, un daži kabeļi ir kaili. Kāds ir mazā kontaktdakšas pārsega mērķis?
Pieskarieties pie biroja pietiekami ilgi un jūs redzēsiet atšķirīgu tendenci tīkla kabeļu tīklā. Dažiem kabeļiem ir pārklāts spraudnis, un daži kabeļi ir kaili. Kāds ir mazā kontaktdakšas pārsega mērķis?

Šodien šī jautājumu un atbilžu sesija mums priecājas par "Stack Exchange" kopuzņēmuma SuperUser, "Sub" nodaļu, kas ir uz kopienām balstīta Q & A tīmekļa vietņu grupa.

Jautājums

SuperUser lasītājs Michael Kjüvelling vēlas zināt:

Some RJ45 plugs have an exposed lock release clip, like this:

However, others place the release clip under a rubber cover, like this:
However, others place the release clip under a rubber cover, like this:
I find that the rubber cover is almost never anything but a nuisance.
I find that the rubber cover is almost never anything but a nuisance.
  • Does it actually have a function besides being annoying?
  • Can I take a suitable tool and simply cut it off without affecting the cable’s function?

Rokas instrumentu uzņemšana sliktajai gumijas segumam šķiet mazliet ārkārtējs. Vai Michael būtu jāatstāj pārsegi?

Atbilde

SuperUser autore Journeyman Geek piedāvā ieskatu:

From experience, those retention clips break off a lot on the first sort of cables – those are fine for cables that are well protected and/or going to be plugged in and forgotten, but the moment those clips bend the wrong way, they break, and you end up with a cable that dosen’t clip in place. They also snag each other sometimes and are just a PITA.

Cable boots (yes thats the proper name for them) keep cables from snagging, those clips from breaking, and generally ensure the cable dies from other things, like rabbit attacks, pruning shear accidents, and backhoe incidents. On the other hand, those cables are not slipping out from their sockets cause a tiny bit of plastic broke, and thats whats important.

Feel free to remove them, or get cables without them, but I personally find them pretty useful (and cables with them tend to be better made in many cases). They have no major structural or electrical purpose.

Otrs ieguldītājs, oKtoSite citā balsojumā pauž pārliecību par kabeļa pievienošanas lietderību:

When retracting a RJ45 plug through narrow tubing or around corners, the clip tends to snap off, effectively making the network cable useless in most environments. The rubber dome (most commonly referred to as a cable boot) nearly always prevents that from happening.

You wouldn’t know how many network cables I’ve seen with broken off clips.

Ņemot to, ka esam iztērējuši mūsu taisnīgo kabeļu daļu, mēs droši esam ar šiem diviem: zābaki ir noderīgi, un, ja vien jums nav pārliecinoša iemesla to darīt citādi, jums vajadzētu atstāt tos.

Vai kaut ko pievienot paskaidrojumam? Skatieties komentāros. Vēlaties lasīt citas atbildes no citiem tehnoloģiju savvy Stack Exchange lietotājiem? Šeit skatiet pilnu diskusiju pavedienu.

Ieteicams: